Xinsu Global Electronic Co., Limited

Main types of Lithium-ion battery

Lithium-ion batteries are classified into liquid lithium-ion batteries (Libified Lithium-Ion Battery, abbreviated as LIBs) and polymer lithium-ion batteries (Polymerium-Ion batteries, abbreviated as PLBs) according to different electrolyte materials used for lithium-ion batteries. Rechargeable lithium-ion battery is the most widely used battery in modern digital products such as mobile phones and notebook computers. However, it cannot be overcharged or overcharged during use. The rated voltage of a lithium-ion battery is generally 3.7V due to a change in material and 3.2V for a lithium iron phosphate positive electrode. When fully charged, the termination charge voltage is typically 4.2V, phosphorous iron 3.65V. The lithium-ion battery has a termination voltage of 2.75V to 3.0V. Continuing to discharge below 2.5V is called overdischarge. Overdischarge will damage the battery. Lithium-ion battery type lithium ion battery is not suitable for large-current discharge, discharge time will be reduced when excessive current discharge, and may be dangerous; but lithium iron phosphate cathode material lithium battery, can be 20C or even larger High-current charge and discharge, especially for electric vehicles. Therefore, the battery production plant gives the maximum discharge current and should be less than the maximum discharge current during use. Lithium-ion batteries have certain requirements for temperature.

The factory gives the charging temperature range, discharge temperature range and storage temperature range. Overvoltage charging will cause permanent damage to the lithium-ion battery. Lithium-ion battery charging current should be based on the battery manufacturer's recommendations and requires a current limiting circuit to prevent overcurrent. The commonly used charging rate is 0.25C to 1C. The battery temperature is often checked when charging at high currents to prevent overheating damage to the battery or causing an explosion. Lithium-ion battery charging is divided into two phases: first, constant current charging, and changing to constant voltage charging when approaching the termination voltage. Example A 800 mAh capacity battery with a termination charge voltage of 4.2V. The battery is charged with a constant current of 800m. At the beginning, the battery voltage is boosted with a large slope. When the battery voltage is close to 4.2V, it is changed to a 4.2V constant voltage charge, the current is gradually reduced, the voltage is not changed, and the charging current is reduced to 1 /10-50C (each factory setting is different, does not affect the use), it is considered close to full, you can terminate the charge.
Related Content
  • Application Prospects of Intelligent Digital Charger

    Application Prospects of Intelligent Digital Charger

    August 1, 2018At present, the most promising chargers in the charger market are the intelligent digital battery chargers, which are determined by the unparalleled advantages of the electric vehicles. With the advan...view
  • Notice for Use of Electronic Scale Charger

    Notice for Use of Electronic Scale Charger

    August 1, 2018The electronic scale has brought us a simple, fast, convenient and safe weighing service. Nowadays, in terms of weighing, we basically use electronic scales.Therefore, we all know that the electronic ...view
  • Charging Method of Lithium-Ion Battery

    Charging Method of Lithium-Ion Battery

    August 1, 2018Li ion secondary batteries are now mainly oriented towards power batteries, which have great advantages over NI-H batteries. The li ion battery can be charged and discharged quickly with the highest c...view
  • How to Use Lithium Batteries Correctly

    How to Use Lithium Batteries Correctly

    August 1, 20181. ChargingWhen you use the lithium batteries, please note that after a period of time, the battery will go into the dormant state. At this time, the battery capacity is lower than the normal value an...view
  • US DOE VI Efficiency Standard

    US DOE VI Efficiency Standard

    December 25, 2017DoE VI energy efficiency certification is an energy efficiency VI reports evaluated and issued by U.S. energy department. DoE VI energy efficiency is a standard for electric power resource utilization...view
  • New UL Certification Ul62368 Is Coming

    New UL Certification Ul62368 Is Coming

    December 25, 2017UL has announced that since June 20th, 2019, audio and video products, IT products and telecommunication products have to apply for UL certification of the new one UL62368-1 instead of the EN60950-1 a...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706858
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor, No. 1 Building,C district,108 Honghu Road,Yanluo Street,Baoan District, Shenzhen,Guangdong, China 518127
午夜影院费试看