Xinsu Global Electronic Co., Limited

Lithium-Ion Charger Charging Process And Precautions

Charging process

1. The LED on the circuit board does not light when the power is not connected
2. If power is connected to the circuit board, the green LED is on, and the circuit board waits for the lithium battery to be inserted.
3. After the lithium battery is put in, it starts charging and the LED turns orange
4. When the lithium battery is fully charged, the charging is stopped and the LED becomes orange
5. After the lithium battery is fully charged, the battery is removed, the LED turns green, and the lithium battery is recharged.
6. During the charging process, the charge percentage is displayed


LED lights:

1. Continuous green: Wait for the battery to be inserted
2. Continuous yellow: charging
3. Continuous orange: The battery is fully charged or has been charged for 6 hours
4. Flashing orange: warning message (output short circuit, reversed polarity, abnormal temperature)

Precautions

1. Make the charger's working choice the same as the battery being charged. If the charger works in a lithium battery state to charge a nickel-metal hydride or nickel-cadmium battery, the battery is not fully charged, which will greatly reduce the working time. If the charger works in a nickel battery state to charge a lithium ion battery, the lithium battery is overcharged, which will seriously affect the life of the battery.
2. To understand whether the battery is fully charged when the charger is fully lit. Some chargers see the full indicator light to remove the lithium battery, some chargers must see the full indicator light to remove the battery.
Related Content
  • The Trend And Prospect of The Power Adapter

    The Trend And Prospect of The Power Adapter

    December 25, 2017Power adapter first appeared in the mid 1980s. Japanese Toshiba, first used the switching power supply technology in external power supply for laptop. It started a new page in the history of power ada...view
  • Precautions for Use of Dehumidifier Adapter

    Precautions for Use of Dehumidifier Adapter

    August 1, 20181. When moving the dehumidifier adapter, do not tilt the unit more than 45 °C to prevent damage to the compressor.2. The applicable temperature range of this machine is 5°C~38°C.3. When the dehumid...view
  • US DOE VI Efficiency Standard

    US DOE VI Efficiency Standard

    December 25, 2017DoE VI energy efficiency certification is an energy efficiency VI reports evaluated and issued by U.S. energy department. DoE VI energy efficiency is a standard for electric power resource utilization...view
  • Reliability And Safety of the 67.2V Lithium Battery Electric Car Charger

    Reliability And Safety of the 67.2V Lithium Battery Electric Car Charger

    August 1, 2018A. 220W high power lithium battery quick charger: precision imported IC control of output charging current special and non-single triode constant current, monitoring each cycle with current limiting c...view
  • Introduction of Golf Cart Charger

    Introduction of Golf Cart Charger

    August 1, 2018The best golf cart charger adopts advanced intelligent high-frequency switching power technology and high quality imported components. It is small in size, light in weight, high in charging efficiency...view
  • Notice for Use of Electronic Scale Charger

    Notice for Use of Electronic Scale Charger

    August 1, 2018The electronic scale has brought us a simple, fast, convenient and safe weighing service. Nowadays, in terms of weighing, we basically use electronic scales.Therefore, we all know that the electronic ...view
  • TEL:+86-0755-29706858
  • FAX:+86-0755-29706858
  • EMAIL:sale@xinsuglobal.com
  • ADDRESS:3rd Floor, No. 1 Building,C district,108 Honghu Road,Yanluo Street,Baoan District, Shenzhen,Guangdong, China 518127
午夜影院费试看